VELIMAX Frosted Black Window Film Privacy Decorative Cling Non-Adhesive Anti-UV 17.7x78.7 inches

Product Description VELIMAX Modern Black Water Window Film

VELIMAX Modern Black Water Window Film is specially designed to give your windows and doors a modern black appearance. Whether you need privacy, want to block out an unsightly view, or simply want to add a decorative touch, this film is the perfect solution. In addition to blocking UV rays, it also reduces unwanted glare while still allowing natural light to shine through. It can be used on any smooth glass surface, requires minimal cleaning, and is a cost-effective way to upgrade your space.

SPECIFICATIONS: Type: Black Translucent Window Film Material: Vinyl + PVC Environmental Standard: Complies with Europe EN71-3 standard and SGSThickness: 0.214 mm (excluding the backing film) Average life: 3 years Package Content: 1 roll of Window Film and 1 Piece of Installation Guide Available Sizes: 17.7' x 78.7" / 17.7 " x 118" / 17.7" x 157.4" / 23.6" x 78.7" / 23.6" x 118" / 23.6" x 157.4" / 29.5" x 78.7" / 29.5" x 118" / 29.5" x 157.4" / 35.4" x 78.7" / 35.4" x 118" / 35.4" x 157.4"

KEY FEATURES - Static Cling without Adhesive - Blocks UV and Glare - Removable and Reusable

HOW TO INSTALL THE VELIMAX WINDOW FILM? 3 TIPS BEFORE YOU START: - Use a small utility knife with breakaway blades for trimming the film. - Create a soapy water solution for spraying by adding 1/4 tsp of liquid soap to 1 quart of bottled water. - Remove any caulk, paint, or glue debris from the window.

8 STEPS OF THE INSTALLATION: 1. Measure and record the dimensions of the glass. 2. Clean the glass thoroughly. 3. Add 1+ inch on every side when cutting the film. 4. Peel off the backing liner. 5. Generously spray the soapy water on both the glass and the window film. 6. Place the film on the wet glass and adjust the position. 7. Use a plastic squeegee to remove water and air from under the film. 8. Trim excess material with a sharp razor or craft knife, leaving a 1/16” wide gap around the edges.

FREQUENTLY ASKED QUESTIONS: 1. How to deal with air bubbles? - Use a hard plastic squeegee or plastic card to remove air bubbles and water. If needed, reapply water and use the squeegee again.

1. Why does the film fall off after a while?

2. Make sure to remove the liner, trim the edges, and squeegee out excess water and bubbles. Leaving a 1/16” wide gap around the edges is essential for proper thermal expansion.

3. Can I remove the film later?

4. Yes, the blackout film is removable and reusable.

5. How to peel off the backing liner?

6. Use scotch tape to create tabs for separating the liner from the film.

WIDE RANGE OF APPLICATIONS: Suitable for Smooth and Clean Glass Surfaces in the Bathroom, Kitchen, Living Room, and Office.

VELIMAX values every customer. If you encounter any defects with our window film or have questions during installation, please contact us directly for the best solution.

OTHER FEATURES: - Non-Adhesive - Privacy Protection - Heat Control - Reusable - Applicable to Smooth and Flat Glass Surfaces - Can be Cut into Any Shape for DIY Glass Decor.

product information: